We've received a few emails asking about how the size of the DRC LED turn signals/flashers (Type 601 and 602) compare to the stock WR250R and WR250X turn signals. See photo above for a comparison.
WHERE TO BUY:
• DRC Type 601 Flashers at SRmoto
• DRC Type 602 Flashers at SRmoto
• DRC Front Turn Signal Mounting Brackets at SRmoto
• WR250R/X DRC Edge2 Tail Light Kit at SRmoto
• WR250R/X Lighting Package Deal at SRmoto
|
Click the YouTube video above for a brief overview of the aftermarket tail light and rear turn signal / flasher options available for the 2008+ Yamaha WR250R and WR250X.
• WR250R/X DRC Edge Tail Light Kit at SRmoto
• DRC Type 601 Flashers at SRmoto
• DRC Type 602 Flashers at SRmoto
• WR250R/X Lighting Package Deal at SRmoto
|
Click video above for a short overview of the DRC Edge Tail Light kit we installed on our WR250R and WR250X project bikes. Also mentioned in the video is the 12oclock Labs DRC Edge2 Processor Upgrade Board installed in the tail light of our WR250R. The upgrade board is a drop-in replacement for the DRC LED board inside the Edge Tail Light, and not only makes the tail light brighter, but also gives you a few additional features like safety brake light pulsing and even integrated turn signals. We also discuss the flashers/turn signals we have installed on each bike, DRC Type 601's and DRC Type 602's.
Tail Light And Flashers:
• WR250R WR250X DRC Edge Tail Light Kit at SRmoto's On-Line Store
• DRC Type 601 Flashers at SRmoto's On-Line Store
• DRC Type 602 Flashers at SRmoto's On-Line Store
Related Products:
• 12oclock Labs Edge Processor Upgrade Board at SRmoto's Store
• WR250R WR250X Lighting Package Deal at SRmoto's On-Line Store
|
The Edge tail light kit was the first mod I did to the WR250X. In conjuction with a pair of DRC Type 601 LED turn signals, it really cleans up the rear fender area of the bike. Here are the parts I used....
• Edge Tail Light Kit (Red Lens)
• OEM Connector Kit (available as an $11 option with the Edge kit above)
• DRC Type 601 LED Turn Signals (Smoke)
Installation was pretty simple and took me about an hour and a half. The OEM connectors are nice because once you install them on the wires for the tail light and turn signals, you can just plug them right into the connectors already on the bike. It makes for a nice plug-n-play installation.
On the Edge tail light, all LED's come on as a running light, then all get brighter when the brakes are applied. License plate illumination is provided by 3 white LED's on bottom of the tail light. The Edge kit does not come with turn signals, so I bought the DRC Type 601 LED flashers which bolt directly to the Edge tail light bracket.
Here are the before and after photos. Notice how nice and small the final product is... a huge improvement over the enormous ugly stock rear tail light and turn signals.
Before (click photo to enlarge)
After (click photo to enlarge)
This is the huge factory piece that is removed from the bike...
Where To Buy:
• Edge Tail Light Kit (Red Lens): SoloRacer.com
• DRC Type 601 LED Turn Signals (Smoke): SoloRacer.com
|
